Surfacing – or resurfacing – a fiberglass swimming pool with tiles is a costly procedure. You don’t need to do it too often, but you still want your pool to appear nice. Fortunately, there are plenty of excellent options available. Mosaic tile is one of the most popular.
This post will look at the benefits of a mosaic fiberglass swimming pool as a pool surface. You’ll learn about the many sorts of tiles available and some of the best materials to use.
Pool Tiles Have A Lot Of Advantages
There are various advantages to tiling your pool over alternative surfaces. Pools with tiles are more durable. Mosaic fiberglass swimming pools are also less difficult to break and replace.
If the plaster surface develops large fractures, you may need to resurface the entire pool. On the contrary, a chipped or cracked tile may be changed individually without causing too much trouble.
Plaster vs Mosaic Pool Tiles
Plaster was originally the most used pool deck material. The times, however, have changed. Although it is still a decent option for a pool floor, tiles provide a few benefits. Tiles are generally non-porous, whereas plaster is porous and facilitates algae growth. Except for tiny development on the grout, algae will not grow on tiles.
Plaster is also susceptible to discolouration, but tile does not. Compared to plaster, which takes a lot more TLC, maintaining tile is a breeze.
Aggregate vs Mosaic Tiles
Aggregate is another sort of pool surface or finish. An aggregate pool finish is made up of shards of stone, glass, pottery, and crystal encased in a plaster matrix. It is applied in the same way as plaster. However, it has a few advantages over ordinary plaster.
Aggregate surfaces, for example, are more durable. The surface is significantly less prone to cracking and chipping, with the aggregate acting as an armature. Aggregate may also be polished to give it a more appealing appearance than plaster. Chemicals have a significantly smaller impact on aggregate finishes than they do on plaster.
How to Install Mosaic Tiles?
Concrete pools can have tiles as a surface. As a result, a new pool should be installed in around three weeks. The procedure of resurfacing a previously established pool, on the other hand, is substantially faster.
First, our experts will empty your pool and inspect the structure for compliance. If you have ancient tiles, you’ll need to remove them completely and the scratch coat beneath them. If you have a plaster finish, you may need to grind off the current plaster layer before you can place the tiles. The same may be said for aggregate.
It may be necessary to take away and replace parts of the concrete that are in bad condition. If the damage is serious, you could choose to renovate the entire pool surface.
Whatever the situation may be, the surface must be cleaned and waterproofed once it has been fixed. While you may perform this procedure independently, it is not recommended. Your pool should be ready for resurfacing by a professional crew who is knowledgeable about the process. You run the danger of having to resurface it in a few years if you don’t.
We lay your selected tile once the surface has been cleaned and prepped. Furthermore, the procedure is rapid. The entire process of resurfacing a pool should take no more than two weeks at the most.
Creating Your Dream Pool
Mosaic tiling may give your pool a fresh, new look or help it blend in better with the rest of your outdoor space. Tile comes in various styles, each with its own set of benefits and downsides.
Have any of these piqued your interest? Which tile would work best in your pool? Pentarm Pools offers more than simply top-notch craftsmanship. Our professional pool installers and technicians can assist you in selecting the appropriate materials and guiding you through the full resurfacing procedure.